Model NO.: CX-FS
Experience: 20 Years
Quality: World-Class
Certificate: ISO, CE, SGS
Principle: Mechanical, Electonic
Certification: GS, CE, ISO
Trademark: GN
Specification: CE, SGS, ISO
Origin: Shanghai China
HS Code: 9026100000
We produce various flow swich and widely used for gas and liquid. and below is the mainly model.
CX-FS-FB Paddle Flow Switch |
Diameter |
DN25…DN150 |
Set range |
20…1800L/min(water) |
Repeatability |
±2.5%FS |
Connection |
terminal type |
Output |
Mechanical switch NO+NC(250VAC,3A) |
Pressure proof |
16 bar |
Average pressure loss: |
0.08bar( at max.flow rate) |
Ambient temperature |
-25…80C |
Medium temperature |
0…90C |
Interface screw |
G1"pipe screw |
Protective class |
IP33 |
Weight |
0.55kg |
Material |
Main body |
stainless steel |
Process connection: |
brass |
Connection rod |
brass |
Baffle |
stainless steel |
Seal |
 NBR |
Housing |
ABS |
CX-FS-FB12 Baffle Flow Switch |
Repeatability |
±2.5%FS |
Connection |
terminal type |
Output |
Mechanical switch NO+NC(250VAC,3A) |
Pressure proof |
16 bar |
Average pressure loss: |
0.08bar( at max.flow rate) |
Ambient temperature |
-25…80ºC |
Medium temperature |
0…90ºC |
Interface screw |
G1"pipe screw |
Protective class |
IP33 |
Weight |
0.85kg |
Material |
Main body |
stainless steel |
Process connection: |
brass |
Connection rod |
brass |
Baffle |
brass |
Seal |
NBR |
Housing |
ABS |
CX-FS-FPD20 Pointer display type piston flow switch |
Medium |
liquid or gas |
Repeatability |
≤±3%full scale |
Pressure |
200bar(stainless steel type)100bar(brass type) |
Output |
normally open output |
Contact capacity |
240VAC / 110VDC 1.5A |
Ambient temperature |
-20…70ºC |
Medium temperature |
0…70ºC |
Protection |
IP65 |
Outlet |
M12*1 |
Material |
Electronic body |
PC |
Switch body |
stainless steel / brass nickel plating |
Spring |
stainless steel |
CX-FS-FR11 Electronic Flow Sensor |
Set range |
1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
Output |
PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
Power supply |
24V±20%DC or 230V±15%AC |
Switching Current |
Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
Unload current |
Max.80mA |
Flow indicator |
LED (6) |
Set type |
potentiometer set |
Proof Pressure range |
100bar |
Temperature gradient |
4ºC/s |
Response time |
1--13s,standard is 2s |
Initialization time |
8s |
Electrical protection |
reversed-phase ,short circuit ,overload protection |
Protection class |
IP67 |
Medium temperature |
20--80ºC |
Environment temperature |
-20--80ºC |
Storage temperature |
-20--100ºC |
Connection |
M12 connector /2m cable (option) |
Material |
Probe is stainless steel . Housing is PBT |
Weight |
0.4kg |
CX-FR-FR12 Electronic flow switch |
Set range |
1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
Output |
PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
Power supply |
24V±20%DC |
Switching Current |
Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
Unload current |
Max.80mA |
Flow indicator |
LED (6) |
Set type |
potentiometer set |
Proof Pressure range |
100bar |
Temperature gradient |
4ºC/s |
Response time |
1--13s,standard is 2s |
Initialization time |
8s |
Electrical protection |
reversed-phase ,short circuit ,overload protection |
Protection class |
IP67 |
Medium temperature |
20--80ºC |
Environment temperature |
-20--80ºC |
Storage temperature |
-20--100ºC |
Connection |
M12 connector /2m cable (option) |
Material |
Probe is stainless steel . Housing is PBT |
Model |
Connection |
Notes |
Accuracy |
HFS-25 |
1″-11½NPT Screw |
Red Case |
5% |
HFS-20 |
¾″-14NPT Screw |
HFS-15 |
½â€³-14NPT Screw |
JYF-25 |
1″-11½NPT Screw |
White Case |
2-3% |
JYF-20 |
¾″-14NPT Screw |
JYF-15 |
½â€³-14NPT Screw |
Rated Voltage?Rated Amps |
A.C.125~250V |
Power(Cosmp.) |
|
Non-inductive Current |
12A |
1 |
|
Full Load |
12A |
0.75 |
|
Locked Roter |
72A |
0.45 |
|
Required Flow for actuating switch (m3/h) |
|
Pipe size (in) |
1 |
1-¼ |
1-½ |
2 |
2-½ |
3 |
4 |
5 |
6 |
8 |
|
Min. Flow |
Flow lower,1-2 closed |
1 |
1.3 |
1.7 |
3.1 |
4.1 |
6.2 |
8.4 |
12.9 |
16.8 |
46.6 |
|
Flow lower,1-3 closed |
0.6 |
0.8 |
1.1 |
2.2 |
2.8 |
4.3 |
6.1 |
9.3 |
12.3 |
38.6 |
|
Max. Flow |
Flow lower,1-2 closed |
2 |
3 |
4.4 |
6.6 |
7.8 |
12 |
18.4 |
26.8 |
32.7 |
94.2 |
|
Flow lower,1-3 closed |
1.9 |
2.8 |
4.1 |
6.1 |
7.3 |
11.4 |
17.3 |
25.2 |
30.7 |
90.8 |
|
Specifications
-- Computerized embroidery machine price
-- Outside-trimming system: Avoided rubbish material and improve stability of terming.
Computerized embroidery machine price/ Ten-head Cap Embroidery Machine Cap embroidery machine/dahao spare parts
Advantage
-- Eight-head Cap Embroidery machine is versatile use , such as , Caps , T- shirts, garment , socks , gloves , trousers , jackets, sleeves , bags and so on.
-- Centralized hooking system: more reasonable thread hooking , add the stability and lifespan of the machine . The device replace solenoid system , reduce noise greatly with more unanimous action , performance improved much.
-- It also can install 2 extra device such as sequin device ,coiling device ,cording device and so on as your request .
Cap Embroidery Machine Parts
Cap Embroidery Machine Parts, Cap Embroidery Machine, Steel Embroidery Machine Parts
Qian Suo Embroidery Parts Co.,Ltd , http://www.china-embroidery-parts.com