1.pipe OD(round):20mm-76mm(Φ0.8~ Φ3.0inch)Â
2.Square pipe:16X16mm-60X60mm Â
3.Wall thickness:0.7-3.0mm Â
4.length:4-12m  Â
5.Speed:20m/minÂ
6.Main motor:132KwÂ
7.H.FÂ welder:200KwÂ
Â
Production process
uncoiling→shearing and butt welding→material accumulating→flattening→forming system→high frequency induction welding machine→inside and outside burr removing frame→water cooling system→sizing system→leveling system→speed testing→Turkish frame→saw cutting→running out table
Specification
1. | Uncoiler |
2. | Accumulator |
3. | Shearing and butt welding machine |
4. | Forming machine |
5. | Roller System of Forming |
6. | Seam Guide |
7. | High Frequency Induction Welding Machine |
8. | Roller System for Moving |
9. | Burr Removing Frame(Inside and outside) |
10. | Water cooling system |
11. | Sizing machine |
12. | Roller System of Leveling |
13. | Speed Testing Wheel |
14. | Turkish Frame |
15. | Auto flying saw controlled by Computer |
16. | Run-out table |
17. | Electric control Equipment18 |
18 | High frequency welding machine |
PAYMENT:
1. T/T or L/C (advise)
2. Wooden packing or PE film sample packing ( Customer requirements )
3. We'll do house inspection for every machine before loading it, and also inspected by buyer in person.
HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to foshan city by high speed train.
2.Just 50 minutes from Shenzhen city to foshancity by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1.5 hour by car from Shenzhen airport to our factory.
Â
Contact:
Mr carson: +86-131-8977-3886






Â
Â
The Check Valve is an automatic valve whose main function is to prevent the reverse flow of the medium, prevent the reverse rotation of the pump and the drive motor, and release the medium of the container and also be used on pipelines where the pressure may rise above the system pressure.
The maintenance free ammonia bellows Globe Valve is our company independent R&D patented product. With two times leak-proof structure the valve has no leakage. The first time is welding the end of the bellows at the valve stem and the upper part of the bellows at the separator, the separator connected bonnet and valve body. By this way the media was cut off from outside. The second time is the packing area combined V style 4 combination seal with O style double seal ring make the packing has no leakage even the bellows not working. Therefore, the valve can fully satisfy ammonia system zero leakage requirement.
Check Valve
Check Valve,Weld Type Check Valve,Chlorine Special Check Valve,Stainless Steel Check Valve
Henan Yunyu Mechanical Equipment Co., Ltd. , http://www.yunyuvalve.com