Long-term stagnation of sweeper maintenance rules

1. Prevent aging and deterioration of rubber products Rubber products on road cleaning vehicles, such as sweeping wheels, transmission belts, and dust covers, often undergo aging, swelling, or deformation, resulting in deteriorated performance and shorter service life. The aging of rubber products is mainly due to the fact that rubber is an unsaturated polymer hydrocarbon that easily absorbs oxygen in the air and oxidizes. Vulcanized rubber also has certain permeability, and oxygen easily enters the interior to cause oxidation. Especially direct sunlight can promote rapid aging of rubber. After rubber products are contaminated with gasoline and engine oil, they will cause volume expansion, loosening gums, and reduced elasticity.
2, to prevent the metal rust Corrosion is mainly caused by the joint action of moisture, oxygen and corrosive substances in the air. Therefore, for road sweepers that are parked for long periods of time, the metal surfaces should be kept clean. Parking garages should always be ventilated to keep the relative humidity below 70%. The dust, dirt, and moisture on the road sweeper should be promptly removed. The rust-prone parts and the surfaces of the parts should be coated with oil, grease or wrap. The pores in each assembly should be sealed to prevent air, moisture and dust from entering the interior.
3, to prevent the anti-explosive performance of gasoline to reduce The anti-explosive performance of gasoline depends on the level of octane gasoline. As the road sweeper is stopped for a long time, the octane number of gasoline will decrease with the loss of light components and the increase of the colloidal content, thereby reducing its antiknocking property. Therefore, the gasoline tank must be tightly sealed and the temperature must not be too high. Gasoline storage time is best not to be too long.
4. Check the working condition of the sweeper engine regularly. Start the sweeper engine at least once a month, idling for 4-5 minutes, and check the running status of the sweeper engine. If there is any abnormality, it needs to be adjusted and maintained in time. In addition, always check the battery. The electrolyte level of the battery must be 10-15mm higher than the plate. When it is insufficient, distilled water should be added in time. The battery should be kept fully charged and the battery should be charged when necessary.

Wire Products

Wire Products generally includes Nails wire, Reinforcing wire, U type wire, Stainless steel wire, Black Annealed Wire, Galvanized Wire, PVC Coated Steel Wire And so on a series of products.

Nails wire also known as hard drawn wire, finds most in uses in nail making or weaving of wire mesh products.

Reinforcing wire usually uses for producing reinforcing wire mesh. It can be in coils or cut as 6m length.

U type wire material is low carton steel, Q235 or Q195.

Stainless steel wire uses for weaving of wire mesh, drawing of wire, in manufacturing of tie wire, nails and other metal products.

Black Iron Wire is made of high quality low carbon steel wire rod Q195 or Q235. The soft black iron wire comes into the form of coil wire, spool wire, U type wire or cut wire.

Galvanized Wire can be supplied in the form of coil wire, bobbins wire, spool wire, cut wire .

PVC Coated Steel Wire is the most popular plastic for coating wires as it is relatively low in cost, resilient, fire retardant and possesses good insulating properties. Its widely used in animal breeding, forestry protection, aquaculture, park and zoo Fence, the stadium, also used in other applications such as coat hangers and handles.

Wire Products,Galvanized Iron Wire,,Aluminum Wire,stainless steel wire, black steel wire

Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com