Factory Directly Supply Tray Dryer, Fruit Drying Machine Ot-C-2

About  Factory directly supply  Tray Dryer,fruit  drying machine OT-C-2    

      Vacuum dryer is to let the raw material be dried at vacuum condition heating and drying. It uses vacuum pump to damp and make the working chamber form vacuum status. Therefore the dry speed is quickened and the working efficiency is raised.





Application
It is suitable for drying raw materials of pharmaceutical industry, chemical industry, foodstuff industry, electronics industry, Chinese traditional medicine industry and so on.



Features
1. The higher dry speed can be achieved at lower temperature and the heating can be utilized fully.
2. Unstable or thermal sensitive raw materials can be dried at lower temperature.
3. Raw materials that contain solvent or the solvent to be recovered can be dried.
4. The treatment of disinfection can be implemented before drying. Any impurities can not be mixed into it during the period of drying.
5. The drier belongs to static vacuum one. Therefore the shape of raw material to be dried can not be damaged.

Brief Introduction
1.most of the hot air can cycle inside the machine , high thermal efficiency ,energy saving.
2.there are some adjustable wind plate inside the machine , which can ensure the material uniform drying.
3.the heat sauce can be gas , electric , hot water , Far infrared etc, very convenient.
4.automatic temperature control,good running balance ,low noise and easy to use and maintain.
5.widely used for fruit,apple slice,vegetable,sea cucumber,fish products,herb, agricultural products, instant foods,mushroom etc.
6.The inside of the material is stainless steel , outside use the steel plate as the material
7.The thermal insulation system layer thickness is 150mm, we use the White aluminum silicate  as the thermal insulation material.
8.the temperature of the machine outer wall is less than 50 degree.






Parameter:

Our service:

Pre-sale
Depending on customer's requirement, we insist on "making profit at lowest investment" and gives best solution as per the customer's special demand.

During-sale
Manufacturing products strictly on contract while customer constructing.
Production progress report each week with detailed description and photos, including with raw materials tables, process and deep process record, testing data sheet, etc
Testing all the equipment by witness of the customer ex-work, delivery, customer acceptance.

After-sale
1. Regularly return visit to the customers.
2.Within 1 year warrant period, we take charge of everything if any quality problems. After the warrant period, we still focus on the plant running and services.
3.Response customer's questions within 1 working day, give effective solutions within 3 working days, go into action with 5 working day.

       That's our promise, as we know quality and service both more important for long-terms development and cooperation.
 
Kindly contact us at any time as below,We will reply you within 24hour.
 
Tel:+86-371-60395600
Fax:+86-371-67681159
Add: Gongye Road, Shangjie District, Zhengzhou City, China

Mall fan

Mall Fan,Commercial Electric Fan,Commercial Exhaust Fans,Fan Mall

Julai (Chongqing) ventilation equipment Co.,Ltd , https://www.julaifans.com