![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Â
    Â
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump,it adopts the slurry as the washing fluid, it can drill on clay,sand and rock if it is equipped with a good drilling bit.
The power of drilling rig comes from the truck engine,the rig setups distribute implement and hydraulic system.We can upset the spare electric engine and clutch implement according to client's requirement,so that the rig can work with diesel engine or electric engine.
We can set up a generator (15KW),so that it is convenient to illuminate or work at night.The adding pressure device is hydraulic,so it has a high efficiency when the rig drill on mud rock and weathering for mation through using the adding pressure implement.
The master driving of rig is mechanical,the four jacks and mast are hydraulic operated.Distribute box,sewage pump,master driving clutch system are air operate. The appearance of rig is pretty,it has high efficiency because of having a larger torque of the turntable,it is mainly used for water well, construction,national defencse building foundation,geological exploration,geothermic well and other foundation working,it is popular withe domestic and foreign clients.
Â
| Technical parameters | |||||
| Drilling depth(m) | 80 | 300 | |||
| Drilling diameter(mm) | 1500 | 500 | |||
| Rotary speed(r/min) | 21.2;36;63.2;100.6;155;20.2(reverse) | ||||
| Rotary torque(KN) | 18;10.6;6;3.8;2.5;18.9(reverse) | ||||
| Single rope lifting capacity of windlass(KN) | 30 | ||||
| The mix lifting capacity of windlass(KN) | 180 | ||||
| Single rope lifting capacity of hydraulic hoisting vice(KN) | 40 | ||||
| The mix lifting capacity of hydraulic hoisting vice(KN) | 160 | ||||
|  The lifting capacity of hook(KN) | 180 | ||||
| Bearing capacity of mast (KN) | 180 | ||||
| The height of mast (mm) | 11500 | ||||
|  Bearing capacity (t) | 25 | ||||
| Pipe | Kelly(mm) | 108*108*7500 | |||
| Assistant pipe (mm) | Φ89*10*5500 | ||||
|
 |
 |  | |||
|
BW850/2A Mud pump  |
Diameter of cylinder (mm) | 150 | |||
| Stroke of piston (mm) | 180 | ||||
| Theory of flow (L / min) |
600Â Â Â Â 850 |
||||
| Rated pressure (Mpa) | 3     2 | ||||
| Pounding  times (min-1) |
58Â Â Â Â 82 |
||||
| Diameter of suction tube (mm) |
127 |
||||
| Diameter of drain pipe (mm) |
64 |
||||
| Input speed (r / min) | 470 | ||||
| Input power (kw) | 40 | ||||
| Overall dimensions (mm) | 2000*1030*1400 | ||||
| Weight (t) | 1.5 | ||||
|
Supporting power |
Engine |
Model | CA6DE3-20E3 | ||
| Rated power(KW) |
147 |
||||
| Speed (r/min) |
2300 |
||||
| The maximum torque |
650.m/1400-1500rpm |
||||
|
Truck chassis |
      Model |  | |||
|  Drive form | 6*4 | ||||
|
 Engine  |
 Model | CA6DE3-20E3(Europe IIIemission standard) | |||
| Rated power(KW) |
147 |
||||
|  Speed (r/min) |
2300 |
||||
| Â | 11110*2490*2500 | ||||
|
Electri generator |
Model | MF | |||
| Rated power (kw) | 15 | ||||
| Rated voltage(v) | 400 | ||||
| Rated current(A) | 27 | ||||
| power factor | 0.8 | ||||
| Speed (r/min) | 1500 | ||||
| Frequency(Hz) | 50 | ||||
| Insulation Class | H | ||||
| Protection level | IP21 | ||||
|  The best working gear (or speed) | 5th gear (1000-1400r/min) | ||||
|  The highest speed(Km/h) | 75 | ||||
|  Weight (kg) | 19600 | ||||
|  Transport size(L*W*H)(mm) | 12160*2490*3440 | ||||
|  Working size(L*W*H)(mm) | 11110*2490*13110 | ||||
Customers visit our factory
With all the effort put in, we have successfully marketed our products to almost every corner of the world. Here are the pictures of our clients' visits and our clients' on-the-site operation.
About the product Packing
To protect drilling rigs during sea transportation, we give them proper packing.
HF130, HF80, HF150E, HF150, HF200, HF30: Wooden case
HF-3, HF-4, HFDX-6. HF-8, HFT200, HFT350B: Plastic woven bag
Spare parts: Wooden case or plastic woven bag
HFT-200, HFT-3: Nude, main machine in plastic woven bag.
Quality guarantee
Our products has been authorized and certified by TUV and ISO9001: 2008. We guarantee the quality of the machines for one year after the trial run (excluding the wearing parts), but not exceeding 15 months from the date on which machines leave the factory.
Â
Truck Mounted Drilling Rig for Sale (HFT500)Â
    Â
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump,it adopts the slurry as the washing fluid, it can drill on clay,sand and rock if it is equipped with a good drilling bit.
The power of drilling rig comes from the truck engine,the rig setups distribute implement and hydraulic system.We can upset the spare electric engine and clutch implement according to client's requirement,so that the rig can work with diesel engine or electric engine.
We can set up a generator (15KW),so that it is convenient to illuminate or work at night.The adding pressure device is hydraulic,so it has a high efficiency when the rig drill on mud rock and weathering for mation through using the adding pressure implement.
The master driving of rig is mechanical,the four jacks and mast are hydraulic operated.Distribute box,sewage pump,master driving clutch system are air operate. The appearance of rig is pretty,it has high efficiency because of having a larger torque of the turntable,it is mainly used for water well, construction,national defencse building foundation,geological exploration,geothermic well and other foundation working,it is popular withe domestic and foreign clients.
Â
| Technical parameters | |||||
| Drilling depth(m) | 80 | 300 | |||
| Drilling diameter(mm) | 1500 | 500 | |||
| Rotary speed(r/min) | 21.2;36;63.2;100.6;155;20.2(reverse) | ||||
| Rotary torque(KN) | 18;10.6;6;3.8;2.5;18.9(reverse) | ||||
| Single rope lifting capacity of windlass(KN) | 30 | ||||
| The mix lifting capacity of windlass(KN) | 180 | ||||
| Single rope lifting capacity of hydraulic hoisting vice(KN) | 40 | ||||
| The mix lifting capacity of hydraulic hoisting vice(KN) | 160 | ||||
|  The lifting capacity of hook(KN) | 180 | ||||
| Bearing capacity of mast (KN) | 180 | ||||
| The height of mast (mm) | 11500 | ||||
|  Bearing capacity (t) | 25 | ||||
| Pipe | Kelly(mm) | 108*108*7500 | |||
| Assistant pipe (mm) | Φ89*10*5500 | ||||
|
 |
 |  | |||
|
BW850/2A Mud pump  |
Diameter of cylinder (mm) | 150 | |||
| Stroke of piston (mm) | 180 | ||||
| Theory of flow (L / min) |
600Â Â Â Â 850 |
||||
| Rated pressure (Mpa) | 3     2 | ||||
| Pounding  times (min-1) |
58Â Â Â Â 82 |
||||
| Diameter of suction tube (mm) |
127 |
||||
| Diameter of drain pipe (mm) |
64 |
||||
| Input speed (r / min) | 470 | ||||
| Input power (kw) | 40 | ||||
| Overall dimensions (mm) | 2000*1030*1400 | ||||
| Weight (t) | 1.5 | ||||
|
Supporting power |
Engine |
Model | CA6DE3-20E3 | ||
| Rated power(KW) |
147 |
||||
| Speed (r/min) |
2300 |
||||
| The maximum torque |
650.m/1400-1500rpm |
||||
|
Truck chassis |
      Model |  | |||
|  Drive form | 6*4 | ||||
|
 Engine  |
 Model | CA6DE3-20E3(Europe IIIemission standard) | |||
| Rated power(KW) |
147 |
||||
|  Speed (r/min) |
2300 |
||||
| Â | 11110*2490*2500 | ||||
|
Electri generator |
Model | MF | |||
| Rated power (kw) | 15 | ||||
| Rated voltage(v) | 400 | ||||
| Rated current(A) | 27 | ||||
| power factor | 0.8 | ||||
| Speed (r/min) | 1500 | ||||
| Frequency(Hz) | 50 | ||||
| Insulation Class | H | ||||
| Protection level | IP21 | ||||
|  The best working gear (or speed) | 5th gear (1000-1400r/min) | ||||
|  The highest speed(Km/h) | 75 | ||||
|  Weight (kg) | 19600 | ||||
|  Transport size(L*W*H)(mm) | 12160*2490*3440 | ||||
|  Working size(L*W*H)(mm) | 11110*2490*13110 | ||||
Customers visit our factory
With all the effort put in, we have successfully marketed our products to almost every corner of the world. Here are the pictures of our clients' visits and our clients' on-the-site operation.
About the product Packing
To protect drilling rigs during sea transportation, we give them proper packing.
HF130, HF80, HF150E, HF150, HF200, HF30: Wooden case
HF-3, HF-4, HFDX-6. HF-8, HFT200, HFT350B: Plastic woven bag
Spare parts: Wooden case or plastic woven bag
HFT-200, HFT-3: Nude, main machine in plastic woven bag.
Quality guarantee
Our products has been authorized and certified by TUV and ISO9001: 2008. We guarantee the quality of the machines for one year after the trial run (excluding the wearing parts), but not exceeding 15 months from the date on which machines leave the factory.
Â
Lighting Aluminium Profile Extrusion Dies
Aluminum alloy lighting material is a material for lighting equipment made of aluminum alloy. Aluminum alloy is lightweight, corrosion-resistant, and has good thermal conductivity. It is suitable for manufacturing various lamps, such as table lamps, floor lamps, wall lamps, etc. Aluminum alloy lighting materials usually have excellent heat dissipation properties, which can effectively dissipate the heat generated by lamps and extend the service life of lamps. In addition, aluminum alloy lighting materials can also be surface treated, such as anodizing, spraying, etc., to increase their wear resistance and corrosion resistance and improve their appearance and texture. Aluminum alloy lighting materials are widely used in lamp manufacturing and have become one of the important materials in the modern lighting industry.
Aluminum alloys are widely used in lighting, mainly in the following aspects:
1. Lamp body material: Aluminum alloy has good thermal conductivity and corrosion resistance, so it is often used as the main body material of lamps, which can effectively dissipate heat and extend the service life of lamps.
2. Reflector: Aluminum alloy has excellent reflective properties and is often used as a reflector for lamps, which can improve the efficiency of light and reduce energy consumption.
3. Radiator: Some high-power lamps, such as LED lamps, will generate a lot of heat. Aluminum alloy has good heat dissipation performance and can be used as a radiator for lamps to prevent the lamps from overheating and ensure their stable operation.
4. Lamp stand: Aluminum alloy has high strength and light weight. It can be used as a light stand for lamps to support the weight of the lamp. It can also reduce the weight of the lamp and facilitate installation and movement.
5. Decoration: The surface of aluminum alloy can be processed in a variety of ways, such as anodizing, electrophoretic coating, spraying, etc., which can change its color and gloss and improve the decorativeness of the lamp.
Therefore, aluminum alloys are widely used in lighting, which can not only improve the performance of lamps, but also improve their aesthetics.
Lighting Aluminium Profile Extrusion Dies,Lighting Profile Extrusion Dies,Lighting Aluminium Profile Extrusion Molds,Lighting Aluminium Profile Extrusion Moulds
Foshan Jieliwei Metal Products Co., Ltd. , https://www.foshanjlw.com