![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
three lobe rotor industrial oil pump
Characteristic
  Lobe pump belongs to positive displacement pump, flow can be controlled accurately and canÂ
change to variable pump conveniently.
  The rotation speed of lobe pump is very low, normally between 100rpm and 500rpm, the material
 is sent out smoothly and the component is not changed.Â
  Lobe pump can transfer high viscosity material, so it also called colloid pump.
  Lobe pump can be made as rather high output pressure conveniently, suitable to long distance or
 high resistance dosing transfer.
Â
Technical parameters:
| Model | L/100RÂ (L) |
rpm | Flow rate (L/H) |
Power (kw) |
Inlet | Connection typec |
| BLS-3 | 3L | 200-500 | 300-800 | 0.55 | Φ25*1.5 | clamp union flange |
| BLS-6 | 6L | 200-500 | 650-1600 | 0.75 | Φ25*1.5 | |
| BLS-8 | 8L | 200-500 | 850-2160 | 1.5 | Φ32*1.5 | |
| BLS-12 | 12L | 200-500 | 1300-3200 | 2.2 | Φ38*1.5 | |
| BLS-20 | 20L | 200-500 | 2100-5400 | 3 | Φ8*1.5 | |
| BLS-30 | 30L | 200-400 | 3200-6400 | 4 | Φ2*1.5 | |
| BLS-36 | 36L | 200-400 | 3800-7600 | 4 | Φ50.8*1.5 | |
| BLS-52 | 52L | 200-400 | 5400-11000 | 5.5 | Φ63.5*1.5 | |
| BLS-66 | 66L | 200-400 | 7100-14000 | 7.5 | Φ63.5*1.5 | |
| BLS-78 | 78L | 200-400 | 9000-18000 | 7.5 | Φ76*2 | |
| BLS-100 | 100L | 200-400 | 11000-22000 | 11 | Φ76*2 | |
| BLS-135 | 125L | 200-400 | 15000-30000 | 15 | Φ89*2 | |
| BLS-160 | 160L | 200-400 | 17000-34000 | 18.45 | Φ102*2 | |
| BLS-200 | 200L | 200-400 | 21600-43000 | 22 | Φ102*2 |
Â
Characteristic
  Lobe pump belongs to positive displacement pump, flow can be controlled accurately and can change to variable pump conveniently.
  The rotation speed of lobe pump is very low, normally between 100rpm and 500rpm, the material is sent out smoothly and the component is not changed.
  Lobe pump can transfer high viscosity material, so it also called colloid pump.
  Lobe pump can be made as rather high output pressure conveniently, suitable to long distance or high resistance dosing transfer.
Â
Â
Application range:
1) food and beverage: dairy, chocolate, syrup, cream, cereal mash, beer and latex.
2) fruit concentration: tomoto paste, pudding, juice, jam and jelly.
3) paste products: fats, grease and etc.
4) cosmetic: face cosmetic, abluent, fixature, spice and so on.
5) medicine: extract, emulsion and pill plasm.
6) chemical industry: dyes, grease, dissovant, resin and polymer
Â
Series Steel Structure Industrial Cooling Tower
Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.
Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,
gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.
Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.
Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.
Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.
Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.
Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com