Split Plummer Block Housings (Sn509)

plummer block housing SN509
 
Housing materials and outer surfaces
The bearing housings are predominantly made from flake graphite cast iron. We can supply housings made from cast steel or spheroidal graphite cast iron by agreement. Since the bearings are generally lubricated with grease and the initial grease filling lasts for a long period, most housings do not have relubrication holes. However, there are cast-on bosses or marks present so that lubrication holes can be made if necessary. If relubrication is carried out, it must be ensured that excess grease is allowed to escape.
All outer surfaces of the housings and housing parts not machined by chip-forming methods have a universal paint coating. The coating can be finished using all synthetic resin, polyurethane, acrylic, epoxy resin, chlorinated rubber, nitrocellulose and acid-hardening hammer tone finishes. The anti-corrosion protection on the inner and outer surfaces machined by chip-forming methods can be easily removed.
When you have time to visit China, please don't forget to call Nancy at Nancy at Mobile: 008618265515940

We are welcome you to visit our factory in any time. We believe our strong pillow blocks production ability will be satisfied by you.

Our other bearings:
plummer block housing SN509
 
Housing materials and outer surfaces
The bearing housings are predominantly made from flake graphite cast iron. We can supply housings made from cast steel or spheroidal graphite cast iron by agreement. Since the bearings are generally lubricated with grease and the initial grease filling lasts for a long period, most housings do not have relubrication holes. However, there are cast-on bosses or marks present so that lubrication holes can be made if necessary. If relubrication is carried out, it must be ensured that excess grease is allowed to escape.
All outer surfaces of the housings and housing parts not machined by chip-forming methods have a universal paint coating. The coating can be finished using all synthetic resin, polyurethane, acrylic, epoxy resin, chlorinated rubber, nitrocellulose and acid-hardening hammer tone finishes. The anti-corrosion protection on the inner and outer surfaces machined by chip-forming methods can be easily removed.
When you have time to visit China, please don't forget to call Nancy at Nancy at Mobile: 008618265515940

We are welcome you to visit our factory in any time. We believe our strong pillow blocks production ability will be satisfied by you.

Our other bearings:

American Suspension

American Suspension,Semi Trailer Suspension,American Type Trailer Suspension,Semi Trailer Mechanical Suspension

RUIAN MIJIA INTERNATIONAL TRADE CO., LTD , https://www.mijiasuspenion.com