![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Soft-film ceilings have been widely used by people nowadays. However, few people really research the surface treatment analysis of soft-film ceilings. Life Xiaobian has obtained relevant data to share the analysis of soft-film ceiling treatment.
The best coating material in the market today is the product of South Korea’s “LG†company. This film is mainly used for home appliances such as refrigerators and washing machines before it is used for smallpox. It has been tested for many years, its performance is stable, and it fully guarantees that it will not change its color for 15 years. Nowadays, there are many ceiling surface treatments in the market, which are also known as laminations. However, it is a kind of domestic film. After molding, the plate is called a plastic laminate. There is also a pearlescent plate, which looks almost like a coated plate, but it is not a film at all. It is only when the electrostatic coating is used, and pearl powder is added to the paint beforehand. This kind of plate is prone to color, usually two or three years later it will change color, paint off.
The surface treatment and process flow of the film-covered board is the same as that of the pre-coated board, except that the surface of the film-covered board is (pvc film); the surface of the film-covered board is firmly bonded, without wrinkles, scratches, peeling, and missing stickers. However, the surface is allowed to have a small amount of micro-wrinkles, concavities and convexities, etc. within 0.2 mm on both sides of the width direction.
From the above, it can be basically seen that the inner quality of the aluminum buckle plate is determined by the aluminum substrate and the surface treatment process. Simply finished the analysis of surface treatment of soft membrane ceiling, my heart should have a bottom!
The best coating material in the market today is the product of South Korea’s “LG†company. This film is mainly used for home appliances such as refrigerators and washing machines before it is used for smallpox. It has been tested for many years, its performance is stable, and it fully guarantees that it will not change its color for 15 years. Nowadays, there are many ceiling surface treatments in the market, which are also known as laminations. However, it is a kind of domestic film. After molding, the plate is called a plastic laminate. There is also a pearlescent plate, which looks almost like a coated plate, but it is not a film at all. It is only when the electrostatic coating is used, and pearl powder is added to the paint beforehand. This kind of plate is prone to color, usually two or three years later it will change color, paint off.
The surface treatment and process flow of the film-covered board is the same as that of the pre-coated board, except that the surface of the film-covered board is (pvc film); the surface of the film-covered board is firmly bonded, without wrinkles, scratches, peeling, and missing stickers. However, the surface is allowed to have a small amount of micro-wrinkles, concavities and convexities, etc. within 0.2 mm on both sides of the width direction.
From the above, it can be basically seen that the inner quality of the aluminum buckle plate is determined by the aluminum substrate and the surface treatment process. Simply finished the analysis of surface treatment of soft membrane ceiling, my heart should have a bottom!
Di-Tert-Amyl Peroxide,Luperox Dta,Tert-Amyl Peroxide,Di-T-Amyl Peroxide
Jiangsu Zhongluman New Material Technology Co., Ltd , https://www.zjrozhmch.com