![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
11.3LPM/3.0GPM 55PSI
Description
Run dry without damage (Run Dry Capability)
Quick-connect plug-in ports for easy installation (Hose Kit Included)
Self-priming
Ignition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor
2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
3. The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Application
1. Yacht / RV/Caravan pressurized water system
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
| Motor Voltage | 12/24V DC |
| Type | 4 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 55psi (3.8bar) |
| Max Flow rate | 11.3lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-055-42 | Demand | 3.0/11.3 | 55/3.8 | 7.5 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-055-42 | Demand | 3.0/11.3 | 55/3.8 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
Seaflo 12V 24V Mini Electric Pump
11.3LPM/3.0GPM 55PSI
Description
Run dry without damage (Run Dry Capability)
Quick-connect plug-in ports for easy installation (Hose Kit Included)
Self-priming
Ignition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor
2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
3. The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Application
1. Yacht / RV/Caravan pressurized water system
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
| Motor Voltage | 12/24V DC |
| Type | 4 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 55psi (3.8bar) |
| Max Flow rate | 11.3lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-055-42 | Demand | 3.0/11.3 | 55/3.8 | 7.5 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-055-42 | Demand | 3.0/11.3 | 55/3.8 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
The bottom of the bowl has a spiral indentation design to prevent leakage and make it more durable. The bowl mouth is smooth and flat, the bowl is full and the body is stiff, and the roll mouth is not broken.
Our cups' bottom, inner, and outer walls are lined with PLA (bioplastic derived from renewable biomass) which prevents leaking and condensation from soaking into the paper, causing the cups to lose their rigidity.
Our cups uses materials that are compliant with the FDA's Title 21 of the Code of Federal Regulations (C.F.R.) Part 176 and are safe for use as food-contact paper products.
Serve hot or cold food with our cups. Holds frozen treats including ice cream sundaes, frozen yogurt, gelato, and hot food items including chili, soup, or macaroni. Great for ice cream shops, concession stands, diners, restaurants, and bakeries!
The greener option to PE (plastic) lined cups, our cups are made of cellulose paper coated with PLA which is a petroleum-free bioplastic. Our cups are certified by the BDI to be in compliance with ASTM D6400 and/or D6868 standards for compostability.
White Paper Cup,White Paper Hot Cups,White Paper Yogurt Cup,White Kraft Paper Soup Cup
Ningbo Senmiao Trading Co., Ltd. , https://www.nbsenmiao.com