Pneumatic three-way female ball valve installation method

Pneumatic three-way female ball valve installation steps: (1) Remove the pneumatic three-way ball valve flange on both sides of the protective cover, the valve is fully open the state for flushing and cleaning. (2) Prior to installation, the complete machine test should be carried out according to the required signal (electric or pneumatic) (to prevent the use of performance due to the vibration caused by transportation). After passing the installation, it can be installed on the line (wiring according to the electric actuator circuit diagram). (3) Flush and remove residual contaminants from clean piping (these may cause damage to the seat and ball) prior to preparation for connection to the pipe. (4) During the installation of the pneumatic three-way female ball valve, do not use the actuator part of the valve as lifting lifting point to avoid damaging the actuator and accessories. (5) Pneumatic three-way female ball valve should be installed in the pipe horizontal or vertical direction. (6) The pipe near the installation point can not be lowered or subjected to external force. The pipe bracket or supporter can be used to eliminate the pipeline deviation. (7) After connecting with the pipe, cross-fasten the flange connecting bolt with the specified torque.

Shoe Sponge

Sponge Shoe Polish has the characteristics of oil resistance and wiping resistance. With the imported high-grade special polyester sponge and flocking process, the sponge eraser has the characteristics of high hardness, good elasticity, deformation resistance, water resistance, oil resistance and wear resistance, which is conducive to the full penetration of shoe polish and the protection of the upper leather.

A shoe sponge is a small sponge used for cleaning and polishing shoes. It is typically made of a soft, absorbent material such as foam or microfiber and can be used with shoe polish or cleaner to remove dirt and scuffs and restore shine to leather or other materials. Some shoe sponges may also have a textured surface for more effective cleaning.

The sponge used for shoe polishing is usually mainly ordinary shoe polish. If it is a very good pair of leather shoes, you can choose to use some of the same type of shoe polish.
Shoe polish is a product used to polish, repair leather shoes or boots, and enhance their waterproof properties, which can extend the lifespan of footwear. Shoe polish is usually in the form of wax or paste. A preparation for wiping the surface of leather shoes to make them clean and shiny. There are liquid, emulsion, semi solid, and solid types, with the main component being wax.

Shoe Sponge,Shoe Shine Sponge Cleaning,Shoe Shine Sponge Polish,Oil Applicator Sponge

Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.yhmcarcare.com