![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Micro-lubrication technology has been widely used in metal cutting in many developed places. When the cutting process is performed, an adequate amount of lubrication can be applied between the cutting tool and the workpiece, and a small amount of oil is supplied, and the lubricant is not wasted and the lubrication requirement is satisfied. Such lubrication technology brings many benefits such as lower cost, improved processing environment, improved processing efficiency, and improved surface quality of the workpiece.
In the domestic market, micro-lubrication technology has also been widely used in the manufacturing process of auto parts, such as the processing of crankshafts, connecting rods and box covers. The unique advantage of micro-lubrication is the use of advanced atomization technology to obtain micron-sized atomized particles that are transported to the cutting point by means of spindles and equipment with internal cooling channels such as drill bits, milling tools, and taps. Oil consumption is in ml/h (ml per hour), which greatly reduces processing costs and maintenance costs. Compared with the traditional processing lubrication method, it has obvious advantages, mainly because the oil mist can be micron-sized and has good permeability, which makes the chip and the processing tool have good lubrication.
The advantages of micro lubrication are as follows:
(1)
The oil mist can penetrate into the friction point and play a good lubrication effect;
(2)
In deep hole machining, the compressed air flow rate takes away the heat of cutting, while a large amount of cutting heat is carried away by the chips.
(3) The fuel consumption is low, and the cutting friction point always has a proper amount of reliable lubricating oil for lubrication;
(4) The product is small in size and low in gas source consumption.
easy to use;
(5) Reduce the operation and maintenance costs of machine tools and machine tool manufacturing costs;
As the influence of cutting fluid on the environment is becoming more and more obvious, the requirements for energy saving and environmental protection are getting higher and higher. It is especially important to choose the proper lubrication method. Micro-lubrication can help enterprises reduce operating costs.
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
Turbine Hard High Speed Door, high speed spiral doors, aluminum high speed door, Aluminum Rapid Door, Aluminum Fast Door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrd.com