Main features of bucket elevator

1. The driving power is small, and the inflow type feeding, the inducing type discharging, and the large-capacity hopper are arranged intensively. When the material is lifted, there is almost no returning and excavating phenomenon, so the ineffective power is small.

2. Wide range of lifting, this kind of hoist has less requirements on the type and characteristics of materials, not only can improve the general powdery and small granular materials, but also can improve the material with high abrasion resistance. It has good sealing performance and less environmental pollution.

3. The operation reliability is good, the advanced design principle and processing method ensure the reliability of the whole machine operation, and the trouble-free time exceeds 20,000 hours. High lifting height. The hoist runs smoothly, so it can reach a higher lifting height.

4. The service life is long, the feeding of the hoist adopts the inflow type, and there is no need to use the bucket to dig the material, and the extrusion and collision phenomenon rarely occur between the materials. The machine is designed to ensure that the material is less sprinkled during feeding and unloading, reducing mechanical wear.

The working principle of the bucket elevator is: the hopper picks up the material from the storage below, and as the Conveyor belt or chain is lifted to the top, it bypasses the top wheel and then flips down. The bucket elevator pours the material into the receiving tank. Inside. The belt of the belt-operated bucket elevator is generally a rubber belt that is mounted on the lower or upper drive roller and the upper and lower redirecting rollers. The chain drive bucket elevator is generally equipped with two parallel drive chains with a pair of drive sprockets on the upper or lower side and a pair of reversing sprockets on the bottom or the top. Bucket elevators are generally equipped with organic shells to prevent dust from flying in the bucket elevator.

Dot Peen Marking Machine

Dot peen marking works by electromechanically striking a carbide or diamond stylus assembly against the surface of a part to be marked.For example,dog tag engraver.The result is a succession of dots to create digits, text, logos, and 2D data matrix codes. Each such dot is the result of a pulsed current that runs through a solenoid, punches a magnet toward the surface, and subsequently returns the stylus to its starting position, awaiting the next pulse. Because each pulse occurs in only a fraction of a second, an entire 2D data matrix code, for example, can be completed in seconds (depending on the size).
Notable Characteristics:
Cost effective
Requires no consumables
High speed accuracy
Will mark any material (including hardened steel)

Compressed air is not required.

dot peen marker

Dot Peen Marking Machine,Pnematic Dot Peen Marking Machine,Pneumatic Marking Machine,Dot Markers,Dot Peen Marker,Dog Tag Engraver

Wuhan HAE Technology Co., Ltd. , https://www.lnsuccess.com

Posted on