![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Application:
Pipeline flushing equipment is to filter out the pipeline construction (installation) caused by the process of pollutants, improve system cleanliness, so that oil cleanliness in the system critical hydraulic components within the pollution tolerance to ensure the reliability of the hydraulic system The life of the component and the component is the necessary measure to eliminate or minimize the early failure of the equipment.Pipeline flushing equipment is a kind of pipeline flushing equipment designed for the pipeline flushing and loading test of the hydraulic system of shipbuilding and metallurgy industry. With beautiful appearance, compact structure, easy to use, reliable performance, low noise advantages. Especially for large ships, metallurgical equipment, hydraulic system piping off-line washing, test operations. Applicable to hydraulic oil, lubricants, diesel and other media.
The device consists of large flow pump, oil tank, filtration system, heater, meter, electrical control cabinet, sampling valve and other components. During running, by the temporary pipeline will be the device inlet and outlet, respectively, in the oil system tank and the pipe to be flushed pipe system inlet pipe connection, constitute a temporary circulation system. The large flow pump sucks oil from the bottom of the tank through the pipe check valve, the pressure relief control valve,flushing system, rough filter, fine filter, and finally the tank; flush the oil under certain pressure and flow circulation, under a certain pressure, the impact of oil flow on the wall attached to the dirt on the pipe to make it off; and then through the coarse fine filter oil filter, rinse the oil at the same time continuous filtration purification, into the pipe system of oil cleanliness meet the operating standards; users can choose online particle detector according requirement.
Â
Technical Parameter List
| Item | Unit | LSGCC-400 | LSGCC-600 | LSGCC-800 | LSGCC-1000 | LSGCC-1600 | LSGCC-2400 |
| Flush Max flow | L/min | 400 | 600 | 800 | 1000 | 1600 | 2400 |
| Flash pressure | Mpa | ≤4(or at user's option) | |||||
| Filter series | - | 2Â grade | |||||
| Filtration precision | - | 6~8Â grade(NAS1638) | |||||
| Motor power | KW | 22 | 37 | 45 | 74 | 110 | 150 |
| Heat power | KW | 20 | 30 | 30 | 40 | 45 | 45 |
| Total power | KW | 42 | 67 | 75 | 114 | 155 | 195 |
| Power supply | V | 380V/50Hz(or at user's option) | |||||
| dimension(L×W×H) | mm | 1000×1200×1500 | 2000×1400×1800 | 2600×2000×2000 | 2800×200×2000 | 3100×2050×2000 | 3500×2050×2000 |
|
Max diameter flushing  |
mm | DN80 | DN90 | DN100 | DN150 | DN200 | DN200 |
Note: The maximum flushing diameter is to ensure that the flow of hydraulic fluid in the tube when the turbulent flow of the theoretical calculation.
Application:
Pipeline flushing equipment is to filter out the pipeline construction (installation) caused by the process of pollutants, improve system cleanliness, so that oil cleanliness in the system critical hydraulic components within the pollution tolerance to ensure the reliability of the hydraulic system The life of the component and the component is the necessary measure to eliminate or minimize the early failure of the equipment.Pipeline flushing equipment is a kind of pipeline flushing equipment designed for the pipeline flushing and loading test of the hydraulic system of shipbuilding and metallurgy industry. With beautiful appearance, compact structure, easy to use, reliable performance, low noise advantages. Especially for large ships, metallurgical equipment, hydraulic system piping off-line washing, test operations. Applicable to hydraulic oil, lubricants, diesel and other media.
The device consists of large flow pump, oil tank, filtration system, heater, meter, electrical control cabinet, sampling valve and other components. During running, by the temporary pipeline will be the device inlet and outlet, respectively, in the oil system tank and the pipe to be flushed pipe system inlet pipe connection, constitute a temporary circulation system. The large flow pump sucks oil from the bottom of the tank through the pipe check valve, the pressure relief control valve,flushing system, rough filter, fine filter, and finally the tank; flush the oil under certain pressure and flow circulation, under a certain pressure, the impact of oil flow on the wall attached to the dirt on the pipe to make it off; and then through the coarse fine filter oil filter, rinse the oil at the same time continuous filtration purification, into the pipe system of oil cleanliness meet the operating standards; users can choose online particle detector according requirement.
Â
Technical Parameter List
| Item | Unit | LSGCC-400 | LSGCC-600 | LSGCC-800 | LSGCC-1000 | LSGCC-1600 | LSGCC-2400 |
| Flush Max flow | L/min | 400 | 600 | 800 | 1000 | 1600 | 2400 |
| Flash pressure | Mpa | ≤4(or at user's option) | |||||
| Filter series | - | 2Â grade | |||||
| Filtration precision | - | 6~8Â grade(NAS1638) | |||||
| Motor power | KW | 22 | 37 | 45 | 74 | 110 | 150 |
| Heat power | KW | 20 | 30 | 30 | 40 | 45 | 45 |
| Total power | KW | 42 | 67 | 75 | 114 | 155 | 195 |
| Power supply | V | 380V/50Hz(or at user's option) | |||||
| dimension(L×W×H) | mm | 1000×1200×1500 | 2000×1400×1800 | 2600×2000×2000 | 2800×200×2000 | 3100×2050×2000 | 3500×2050×2000 |
|
Max diameter flushing  |
mm | DN80 | DN90 | DN100 | DN150 | DN200 | DN200 |
Note: The maximum flushing diameter is to ensure that the flow of hydraulic fluid in the tube when the turbulent flow of the theoretical calculation.
Zinc is one of the most versatile die cast metals. It provides higher precision with lower tooling costs when compared to other die cast metals like aluminum or magnesium. Zinc Die Casting also offers a broad range of excellent physical and mechanical properties, finishing characteristics, and is the easiest to cast. Die casting is a versatile, efficient and economical process for producing engineered metal parts.
Die casting offers a broader range of shapes and components than any other manufacturing technique. The die casting process requires a steel mold. These reusable steel molds, called dies, can be designed to produce complex shapes with a high degree of accuracy and repeatability. The dies are mounted into a machine that injects molten metal into the dies under high pressure. Once the molten metal has solidified, the die is opened and the casting is ejected from the mold. The die is then closed and the process starts over.
Zinc Die Casting,Casting Zinc Alloy,Die Casting Zinc,Die-Cast Zinc Alloy,Zinc Alloy Die Casting
NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.ruican-casting.com