![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Wanting a single bridge warehouse truck to start relatively smoothly, the quality of the diesel filter is extremely crucial. Nowadays, the production technology of single-bridge warehouse trucks and trucks is getting better and better, and the quality of diesel engines is also getting higher and higher. It is inevitable that some diesel engine drivers feel depressed. Because of the problems in the quality of oil products, it is necessary to pay attention to some operating conditions of the diesel fuel filter at all times, and to reduce the fuel quality, it will have some impact on the engine of the vehicle.
The single-bridge warehouse truck diesel engine primary filter is mainly used to filter out some solid particulate impurities in the diesel. It is usually installed on the engine, or on the girder of a single-bridge warehouse truck. The diesel fine filter is mainly used to filter those finer solid particles and impurities, so as to obtain more high-quality diesel, its installation position is generally near the engine oil pump.
If impurities and particles penetrate into the fuel supply system of the single-bridge warehouse truck, the fuel components are easily damaged, and the main component that can potentially prevent these potential hazards is the diesel filter. The structure of the truck diesel filter is similar to that of the oil filter. In fact, the operating pressure and oil temperature resistance of diesel fuel filters are lower than those of oil filters. The engine oil is used as the main engine oil, and the temperature it needs to withstand is a few hundred degrees Celsius. Therefore, the required high temperature performance of the oil filter is also very important, and the diesel filter can only ensure a relatively smooth fuel supply at the natural environment temperature, but the required filtering effect is a pharmacy oil. The main reason for the high filter quality is that due to the accuracy required by the fuel injection system of a single axle warehouse truck truck engine, fuel injection pressure of 2000 bar can be achieved, so that the fuel can be fully atomized, as long as it is A small amount of impurities will cause the plugging of the single-bridge warehouse truck injection system. Severe conditions can also cause the injectors to be scrapped.
Because of the high sulphur content of diesel oil in our country, it is relatively easy to generate sulphuric acid after reacting with water in the process of combustion. This will corrode the components of the diesel engine, and the oil and water separation of the single-bridge warehouse trucks. The main use performance of the device is to separate moisture from diesel oil. Single bridge warehouse truck oil-water separator is mainly installed under the coarse filter, it looks like a transparent filter cup. Its principle of use is to remove water and impurities by using the principle of gravity sinking, based on the density difference between fuel and water.
An excavator rotating grapple is an attachment that can be added to an excavator to help with material handling. It is essentially a large claw that can be opened and closed to grab and hold onto objects such as logs, rocks, and debris. The rotating feature allows the grapple to rotate 360 degrees, making it easier to position and place objects in the desired location. This attachment is commonly used in construction, demolition, and forestry industries.
Skid Steer Rotating Grapple,Rotary Grapple,Hydraulic Rotating Grapples,Rotating Log Grab
CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.cattiltrotator.com