How to set up a wireless surveillance video transmission system in the wild mountain area

With the development of wireless technology, the demand for communication systems in the country and society is growing. In the general urban environment, traditional network communication is sufficient, but for the steep and complex geographical and mountainous areas, more advanced technologies are needed. For this reason, wireless monitoring systems have emerged to realize broadband in special environments. Emergency wireless communication. Here's a detailed introduction to how to build a wireless surveillance video transmission system.

In the wild mountain areas, there is generally no network signal, but this does not affect the transmission of the equipment, because the wireless monitoring microwave transmission itself has transmission capacity, and the transmission distance is not equal. Specifically, in the construction of a complete wireless monitoring system in the wild mountain areas, the following aspects must be done:

1, equipment selection

The quality of wireless monitoring equipment is an important factor to ensure the stable transmission of monitoring signals. The quality of industrial-grade quality wireless monitoring equipment and civilian-grade wireless monitoring equipment are far from each other. Generally, wireless monitoring equipment installed in mountainous areas in the wild is required to have functions such as rainproof, dustproof, and anti-jamming. These can only be done by wireless monitoring equipment of industrial quality or above. For example, Tengyuan Zhituo focused on the development and application of wireless monitoring equipment for 13 years. The wireless monitoring equipment produced by the company has industrial quality and above, and can be stably transmitted in the harsh environment in the wild.

2. Lightning protection requirements:

When installing wireless monitoring equipment in the wild in the wild, if there are no tall buildings or lightning rod protection nearby, lightning protection measures should be considered. Lightning rods are usually used. Generally, when lightning protection is installed in the urban area or surrounded by lightning rods, the lightning rods may not be separately installed. It is recommended to use the POE lightning protection module when installing the device. However, the lightning protection module is used to prevent damage to long-distance wireless monitoring equipment such as static electricity, surges, and AC lightning, and cannot prevent direct lightning strikes.

3. Power supply requirements

In the wild mountain areas, it is difficult to take electricity. Generally, solar power is used to take electricity, or wind power can be used for electricity. If the local environment is almost rainy and rainy for a month, it is recommended to use wind energy or solar energy plus wind energy to collect electricity to ensure that there is enough power to provide normal operation of the equipment.

4, equipment grounding requirements

The long-distance wireless bridge should be grounded. If the equipment is not grounded, it will cause abnormal operation and damage. The grounding resistance of the equipment should be less than 4 ohms, and it cannot be grounded with lightning rods and strong electric lines. Grounding is also required if a PoE power ground is used. Users can connect to the PoE adapter with a grounded Category 5 (or above) shielded network cable for grounding, which can easily and effectively prevent static electricity and lightning strikes.

Based on 13 years of wireless monitoring industry experience, Tengyuan Zhituo has wireless monitoring applications in various environments. We will provide the most suitable wireless monitoring equipment for users. More wireless monitoring equipment knowledge, welcome to pay attention to Tengyuan Zhituo.