How to maintain and overhaul the magnetic pump

Routine maintenance and overhaul of magnetic pump methods: five maintenance instructions magnetic pump:

1, shaft break:

Magnetic pump shaft material used is 99% of the alumina porcelain, the main reason for the shaft is broken, because the pump runs dry, bearing dry grinding and the shaft twist off. Open the pump inspection can be seen when the bearing has been seriously damaged to prevent the pump broken off the main method is to avoid the air pump running.

2, bearing damage:

Magnetic pump bearings are made of high-density carbon material, in case of pump water or pump impurities, it will cause the bearing damage. Cylindrical coupling inside and outside the rotor between the coaxial requirements if not guaranteed, it will directly affect the bearing life.

3, lack of head:

The reasons for this failure are: transmission medium air, impeller damage, speed is not enough, the proportion of liquid transport is too large, the flow is too large.

4, lack of flow:

The main reasons for the lack of flow are: impeller damage, speed is not enough, the lift is too high, the tube is clogged with debris

5, magnetic pump can not hit the liquid:

Magnetic pump can not play the liquid pump is the most prone to failure, its reasons are more. First of all, check whether the pump suction pipe leaks, check the suction pipe air is exhausted, the amount of liquid filled in the magnetic pump is sufficient, inhalation tube whether there is debris clogging, check whether the pump is reversed (Especially after changing the motor or overhauling the power supply line), you should also pay attention to whether the suction height of the pump is too high. If the above inspection still can not be solved, the pump can be disassembled to check whether the pump shaft is broken or not. Check whether the moving ring and the static ring of the pump are intact, and whether the entire rotor can move in a small amount of axial direction. If the axial movement difficulties, can check whether the carbon bearing with the pump shaft is too close.

This article Keywords: magnetic pump

Medical Waste Treatment Machine

Background:

Medical waste with strong infections, toxic and corrosive,emissions, lax management or improper handling characteristics. It could be winnowing or failure by rain leaching, causing pollution to water body, atmosphere, soil and making direct harm to human body.

In order to ensure the medical waste is timely, efficient and harmless be disposed and to prevent the spread of disease, after years of scientific research, our company designed medical waste treatment machine, which use high temperature

disinfection and sterilization of medical waste biomass decomposition of fuel oil project, can turn a thorough treatment of medical waste, saves the cost of transportation, the landfill can also be used to create higher economic benefits.

 

End Products Usage:

1. Fuel oil  used as fuel for industries such as steel&iron factories,ceramic or chemical industries or hotels restaurants etc.

2. Carbon black  be used as garden fertilizer

3. Sync Gas     be recycled to heat machine

 

Medical Waste Treatment Machine Picture;

 

Advantages:

1. Integrated design of reactor and base, no civil work needed to make the installation faster and easier.

 

2.Sync gas purification system is designed for developed countries which has very high environmental standard. It makes the full operation process under slightly negative pressure to ensure the safety of operation. And the system removes acid content of the sync gas to ensure the production is both clean and environmental friendly.  

 

 

3.National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas 

and dust of the smoke through neutralization, purification and absorption, environmental friendly without pollution.

 

4.National Patent automatic Carbon Black Discharging System: Speedy fully 

enclosed Auto-discharging under high temperature, avoiding carbon black pollution and saving time.

 

5.Safety aspect:Production under Slightly negative pressure, automatic 

submerged welding technology, ultrasonic nondestructive testing, both manual and 

automatic safety devices.

 

Parameters:

NO.	ITEM	Technical Parameter
1	Door Model	Full Open Door
2	Suitable Raw Materials	Medical waste
3	Structure	Horizontal Type Revolves
4	Main Reactor Size	Φ2200*6000mm   Φ2600*6600mm
5	Daily capacity	5~6MT 8-10MT
6	Work Pressure	Normal Pressure
7	Reactor Rotation Speed	0.4R/M
8	Power	18-25 kw
9	Cooling Method	Cycle Water
10	Type of Drive	External Annular Gear
11	Heating Method	Direct Heating
12	Type of Installation	With Foundation
13	Noise dB(A)	≤85
14	Operating Mode	Intermittent Operation
15	Total Weight(MT)	25~40Mt
16	Installation Space Required	30m*10m
17	Manpower	3~4/batch
18	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Medical Waste Treatment Equipment

Medical Waste Treatment Equipment,Medical Waste To Oil Machine,Medical Waste Recycling

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com