High-tech used in cold-storage car of Hubei Chengli Special Carry Factory

Refrigerated car body production technology:

1. The “sandwich” plate bonding type of split sheets is assembled. At present, larger refrigerated truck manufacturers in China have adopted this technology. Refrigerator vehicles produced using this technology have higher heat insulation performance.

2. Fragmented injection foam type.

3, the overall skeleton injection foam type.

4. Vacuum Adsorption Paste Refrigeration Units Category: Refrigeration units are divided into non-independent refrigeration units and independent refrigeration units. Domestic units and imported units. General models use external coolers, and a few mini-refrigerators use built-in coolers. For refrigerators with lower temperature requirements, a built-in cold plate (functionally equivalent to an evaporator) can be used

To think of the insulation effect of the car body, it is naturally the choice of insulation material.

The advanced refrigerated car insulation car has high requirements for the insulation material:

(1) Uniform foaming and low density;

(2) The thermal conductivity is as small as possible, generally less than 0.045 W/(m?K);

(3) The stability to temperature changes is better, and the performance must meet the specified requirements within the temperature range of -40 to 70 °C;

(4) Has a certain mechanical strength, can withstand the vibration and impact of the car in bad road conditions without damage or deformation;

(5) Low water absorption and moisture absorption, good frost resistance;

(6) Non-toxic, odorless, low air permeability, no toxic and harmful gases can be decomposed when the heat-insulating material burns

(7) The price is low and it is easy to form. It can be filled, poured, sprayed and other processes to form the heat insulation layer of the carriage.

hotline

Electric Parts

Tower Crane Electrical Parts help to build the electrical control system and make the Tower crane work. Crane Electric Parts refer to the elctric parts for tower crane such as Crane Anemometer, tower crane resistor, Slewing Control Block, Frequency Inverter, Encoder, Circuit Breaker, Tower Crane Transformer, Tower Crane PLC, Slewing Controller are quite common spare parts inside the Electrical Cabinet.

Crane Electric Parts,Crane Anemometer,Tower Crane Electrical Parts,Slewing Control Block,Frequency Inverter

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com