Model NO.: ZX3400
Color: Green, Black
Ceramic Heating Element: Kanthal Wire
Gasket: Resist High Temperature, Imported From Japan
Bearing: Imported From Japanv
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Boxs or Plastic Kits
Specification: 1.65kg
Origin: Shanghai
Model NO.: ZX3400
Color: Green, Black
Ceramic Heating Element: Kanthal Wire
Gasket: Resist High Temperature, Imported From Japan
Bearing: Imported From Japanv
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Boxs or Plastic Kits
Specification: 1.65kg
Origin: Shanghai
230v 3400w heat gun hot air gun for pvc weldingÂ
Hot air welder | ||||
Temperature controll | We use photocell to controll temperature inside. | |||
Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. |
|||
Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
Bearing | We use high temperature bearing manufactured in Japan. | |||
Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
ZX1600 | ZX3400 | 1.Power cord |
Voltage(V) :42 100 120 200 230 For 50/60Hz | Voltage(V) :200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
Weight (kg) :1.3 with 3m cord | Weight (kg) :1.4 with 3m cord | 5.Handle & Nozzle |
Temerature :20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
Air flow (1/min) :Max.230 | 7.Rubber stand | |
Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
Size (mm):Customized | 9.Heat protection tube |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.





Â
Hot air welder | ||||
Temperature controll | We use photocell to controll temperature inside. | |||
Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. |
|||
Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
Bearing | We use high temperature bearing manufactured in Japan. | |||
Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
ZX1600 | ZX3400 | 1.Power cord |
Voltage(V) :42 100 120 200 230 For 50/60Hz | Voltage(V) :200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
Weight (kg) :1.3 with 3m cord | Weight (kg) :1.4 with 3m cord | 5.Handle & Nozzle |
Temerature :20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
Air flow (1/min) :Max.230 | 7.Rubber stand | |
Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
Size (mm):Customized | 9.Heat protection tube |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.





GHL company is professional manufacturer for Insulating Glass Production Line, main products include all size of inside and outside assembly Ig glazing glass product equipment, online gas filling machine.Insualting Glass Sealing Robot ,butyl Sealant Coating Machine , Spacer Bending Machine and Desiccant Filling Machine etc.
All products passed CE certificate .
We have many after-sales agencies, could supply perfect after-sales service in the world.
Insulating Glass Sealing Robot
Sealing Robot For Glass,Glass Sealing Machine,Insulating Glass Sealing Robot,Insulating Glass Sealing Machine
Shandong GHL CNC Machinery Co., Ltd , https://www.ghlglassmachine.com