H-Beam Combination Workstation for Assembly, Welding and Straightening

. Introduction


H-beam combination workstation is used for H-beam or T-beam assembly, welding and straightening. It centralize the assembly, welding and straightening functions on one machine which saves space and economize workshop. Reduce workflows: shorten the production time and improve the efficiency. Economize the investment of crane equipment and operator.
 
2. Main Parameters

       *We reserve the right to alter specifications without prior notice.
 
3. Main features


The standard models of our H-beam combination workstation for assembly, welding and straightening has the following features:


 Robust all steel fabrication with stable structure and good rigidity, and no deformation after long time using;
 Synchronous clamping and centering system for web and flange;
 Japan Mitsubishi PLC controller;
 The whole system is using the PLC, and the speed of straightening, assembly and welding is the same;
 American Lincoln DC-1000,NA-3S single arc twin wire welding power;
 Flux feeding and recovery machine;
 Heat treatment to main welding parts after welding; sand blasting treatment to main welding parts before painting;
 All motion parts have lubrication system;
 Main electric elements are ABB/Siemens brands;
 Lifting lug;
 Standard color:
 
4. Reference photo

Blind Flange

Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.

From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.

However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.

Blind Flange,Blank Flange,Blind Plate,Pipe Blind Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com