1.Gerneral Specification
Â
Specification |
16Â pcs Curing Chamber for Truck Tyre |
Range of Tyre Size |
Within Size of 12.00-24 Truck and Passage Bus Tyre |
Operating Worker No |
Min. 4Staff(6 staff better) |
Workshop Area |
Min. 350m2 |
Curing Time |
220Minutes/per shift(Timing at 112°C) |
Max Daily Work Shift |
4ps/day |
Max Daily Output |
64 Â pcs/day for within ruled max size tyre |
Min Required Power |
380V,50HZ.,80KW |
Min Required Air Supply |
0.8Mpa |
Min Air Compressor |
1pcs(Air Displacement:1.5m3/min; Work Prssure:1.20Mpa;Auto Power:11KW |
Min Required Air Storage |
1pc(Storage Volume:1M3; Work Prssure:1.25Mpa;Temperature:100°C) |
Â
Â
2.Function Description
Â
 a.Suitable for double-envelope curing, rim&tube curing and envelope-sealing ring curing
 b.Display the curing parameters and the working state of kay components
Â
 c.Alarm when fault happens also has fault analysis
Â
 d.Adopt isolation transformer to keep PLC work smoothly
Â
 e.Heating tube heat alternately when start curing,maintain temperature balance
 d.Optional Tire size:5"-15",  15"-22.5",  22.5"-25",   25"-33".
Â
Can be designed according to your output.
Â
3.The process as follow
    tyre clean firstly dry tyre → inspecting tyre → buffing tyre → buffing outer wound of tyre → buffing inner wound of tyre → secondly inspecting tyre → repair inner wound → brushing adhesive on roof of tyre → secondly drying tyre → repair outer wound → affix middle rubber piece → tread building →assemble envelop → assemble inner tyre → assemble curing rim → inspecting inner tyre and curing rim → curing→ disassemble curing rim→ disassemble inner tyre → disassemble envelop → inspect end product → embellish tyre→ store tyre.
Â
Â
4.Service
Â
We provide the whole set tire retreading solutions for clients who want to set up a new retreading factory/plant for used tyre recycling business.Such as Free Layout your workshop, Free installing,Free Training your worker.
Â
Â
If you want to know more about tyre retreading machines,Please feel free to contact us at any time.
Â
Â
Lisa(area manager) Moble Phone: 0086-183 2173 6283
Â
Â
Â
Â
 fully automatic Truck Tire Repair Tyre Vulcanizing Machine for retreading business
 1.Gerneral Specification
Â
Specification |
16Â pcs Curing Chamber for Truck Tyre |
Range of Tyre Size |
Within Size of 12.00-24 Truck and Passage Bus Tyre |
Operating Worker No |
Min. 4Staff(6 staff better) |
Workshop Area |
Min. 350m2 |
Curing Time |
220Minutes/per shift(Timing at 112°C) |
Max Daily Work Shift |
4ps/day |
Max Daily Output |
64 Â pcs/day for within ruled max size tyre |
Min Required Power |
380V,50HZ.,80KW |
Min Required Air Supply |
0.8Mpa |
Min Air Compressor |
1pcs(Air Displacement:1.5m3/min; Work Prssure:1.20Mpa;Auto Power:11KW |
Min Required Air Storage |
1pc(Storage Volume:1M3; Work Prssure:1.25Mpa;Temperature:100°C) |
Â
Â
2.Function Description
Â
 a.Suitable for double-envelope curing, rim&tube curing and envelope-sealing ring curing
 b.Display the curing parameters and the working state of kay components
Â
 c.Alarm when fault happens also has fault analysis
Â
 d.Adopt isolation transformer to keep PLC work smoothly
Â
 e.Heating tube heat alternately when start curing,maintain temperature balance
 d.Optional Tire size:5"-15",  15"-22.5",  22.5"-25",   25"-33".
Â
Can be designed according to your output.
Â
3.The process as follow
    tyre clean firstly dry tyre → inspecting tyre → buffing tyre → buffing outer wound of tyre → buffing inner wound of tyre → secondly inspecting tyre → repair inner wound → brushing adhesive on roof of tyre → secondly drying tyre → repair outer wound → affix middle rubber piece → tread building →assemble envelop → assemble inner tyre → assemble curing rim → inspecting inner tyre and curing rim → curing→ disassemble curing rim→ disassemble inner tyre → disassemble envelop → inspect end product → embellish tyre→ store tyre.
Â
Â
4.Service
Â
We provide the whole set tire retreading solutions for clients who want to set up a new retreading factory/plant for used tyre recycling business.Such as Free Layout your workshop, Free installing,Free Training your worker.
Â
Â
If you want to know more about tyre retreading machines,Please feel free to contact us at any time.
Â
Â
Lisa(area manager) Moble Phone: 0086-183 2173 6283
Â
Â
Â
Â
Â
Fings type: laser welded fin tube
Base pipe material: steel, aluminum, copper, titanium, etc
Heat material: copper, aluminum
Wender tube length: unlimited
Product Description: 100% welded between fin and tube without filling material.The laser welding in the weld.
Pipe outer diameter 8.0-50.0 mm Wing outer diameter 17.0-80.0 mm wing pitch 5-13 fins / inch wing height 5.0-17 mm fin thickness 0.4 1.0 mm maximum pipe length 12.0 m.
usually,Squeeze wings Utend Power plant, chemical industry, heat recovery plant, thermal industry
The maximum operating temperature is 400 C.
Stainless Steel Welded Pipe,Stainless Steel Welded Pipes,Spiral Welding Pipe,Welded Spiral Pipe
Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com