![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The dry granulator is the latest granulation method developed after the "step-granulation" of the second-generation granulation method. It is an environmentally friendly granulation process that directly presses the powder into pellets. . Dry granulator is widely used in granulation in the pharmaceutical, food, chemical and other industries. It is especially suitable for granulation of materials that are susceptible to heat decomposition, decomposition or agglomeration. The pellets produced by the dry granulator can be directly compressed or filled into capsules.
It is understood that the dry granulator uses the latest roll control technology. The control equipment of the equipment can adjust the fluctuation of any physical property between different materials and batches of the same material, so that the dry granulation process parameters can be accurately and repeatedly To adjust to efficiently produce high quality particles. The dry granulation technique can be accomplished by a roller flattener. The Chinese herbal extracts with a certain relative density were spray-dried to obtain dry extract powders. After adding certain auxiliary materials, they were pressed into a sheet by a dry extruding granulator and then crushed into granules. The method requires less auxiliary materials, which helps to improve the stability, disintegration and dissolvability of the particles.
In the future, dry granulators will meet the requirements for cleanliness and functional flexibility. First of all, for a completely enclosed dry granulation system, dust pollution during production can be reduced, thereby reducing the risk of contamination and pollution. Secondly, the equipment is modularly designed and the whole granulation device can use only a few tools. Detachable, easy to clean all modular units, and can easily replace the screw and the pressure roller to adapt to different granulation tasks.
With the continuous development of the pharmaceutical market, people's expectations and requirements for the pharmaceutical industry are also increasing, and the application of granulation technology can greatly improve the efficiency of preparation of traditional Chinese medicine particles and the quality of finished products, so after the granulator In the course of its development, we must pay attention to technological innovation, continuously push new innovations along with market changes, and also meet the requirements of clean and flexible industries.
LED Car Light
LED car lights refer to the use of LED technology inside and outside the car for external and internal lighting. External lighting equipment involves thermal limits and EMC issues, as well as many complex standards for unloading load testing. LED car lights can be widely used to create the environment in the car. The life span is 50,000 hours. The structure of the LED is sturdy and not easily affected by vibration. The light output brightness will not significantly decrease during use. LED car lights are suitable for various lighting applications of automotive electronics, including headlights (high beam and low beam), fog lights, tail lights, brake lights, turn signal lights, daytime running lights, pedal lights, instrument lights, license plates Lights, door lights, interior lights, width indicator lights, navigation, entertainment systems, backlights and indicator lights, etc.
- Advantage
1. Energy saving: Light-emitting diodes are directly converted from electrical energy to light energy. Compared with ordinary car bulbs, the power consumption is only 1/10 of that of traditional lamps, which can better save fuel consumption and protect car circuits from being burned by excessive load currents. Bad.
2. Environmental protection: There are no ultraviolet and infrared rays in the spectrum, low heat generation, no radiation, low glare, and the waste can be recycled, no pollution, no mercury, and safe touch. It is a typical green lighting light LED source.
3. Long lifespan: There is no loose part in the lamp body, and there are no shortcomings such as easy burning, thermal deposition and light decay of the filament. Under the appropriate current and voltage, the service life can reach 80,000 to 100,000 hours, which is longer than that of traditional light sources. More than 10 times longer. (It has the characteristics of one-time replacement and lifetime use)
4. High brightness and high temperature resistance. (Electric energy is directly converted into light energy, and the heat is small, and it can be touched by hand, which is safe and secure)
5. Small size. The designer can change the lamp mode at will to make the car diversified. Automobile manufacturers' favor of LEDs is entirely determined by the advantages of LEDs themselves.
6. Good stability, strong anti-vibration performance of LED: resin encapsulation, not easy to break, easy to store and transport.
Seven, the luminous purity is high, the color is clear and bright, no lampshade is needed to filter the light, and the light wave error is within 10 nanometers.
8. The response speed is fast, no hot start time is needed, and it can emit light within microseconds. The traditional glass bulb bulb has a 0.3 second delay, which can prevent rear-end collision and ensure driving safety.
Led Car Light,Custom Car Headlight,5 Chips Led Car Light,Car Led Lighting Package
Bingri Electronic Technology (Shenzhen) Co., Ltd. , https://www.bingriuvled.com