Disposable Gynecology Rigid Biopsy Forceps Oval Cup Jaw

MIM(Metal powder Injection Molding) is the 5th generation of metal forming technology.  Over 40 years of development, people gradually find more applications for MIM process especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years.
Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.


MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production

Flow chart of metal injection molding




Application of MIM






Products Range:
  
product field
 







FAQ

1.How can I give you an offer?
Please send us product 2D/3Ddrawings.
PROCESS
Customer Inquiry →Engineering Communication →Cost Analysis →Sales Analysis →Quote to Customer
» 1 Work Days Only
» Submit RFQ with complete commercial terms
   

2. How to transport?
For small quantity, we choose TNT, FEDEX, UPS etc
For big quantity, air or sea would be available .
 
3. packing details?
We attached our normal packing details Plastic disc/carton.
If the customer has specified packing specification, we will pack according to the customer's requirement.

Company Profile

• Design and manufacture Metal Injection Molding Parts, Ceramic Injection Molding Parts, Plastic Injection Molding Parts
• Current 10,000 Manufacturing Space, 30,000 in Construction;
• More than 200 Employees, 17 Engineers;
• 2017 Sales Revenue >10 Million USD;
• IATF 16949, ISO 9001, OHSAS 18001, ISO 14001;
• 5% Revenue Yearly Invested in R&D;
• Best Machines, Germany Arburg, Japan Nissei, Japan Shimadzu;etc.;
• Serving Top Players in Industries of Auto, Consumer Electronics, Medical Appliance, etc. ;

 

The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10).

 

The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;

The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;

Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .

The capacity of each batch of products ranges from 5 tons to 20 tons.

LN-2200-6000 capacity 5-6 tons

LN-2200-6600 has a capacity of 7-8 tons

LN-2200-8000 has a capacity of 9-10ton

LN-2600-6600 has a capacity of 10-12ton

LN-2600-8000 has a capacity of 12-14ton

LN-2800-6000 capacity is 10-12ton

LN-2800-6600 has a capacity of 12-14 tons

LN-2800-8000 capacity is 15-20ton

If cut into small pieces, it can handle more.

Small Scale Plastic Recycling Plant

Tyre Pyrolysis Plants,Waste Pyrolysis Solutions,Waste Pyrolysis Equipment,Reactor Plate Pyrolysis to Oil Machine

Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com