Direct Drive Feed-off-The-Arm Flat Seaming Machine

FOXSEW 4-Needle 6-Thread Feed Off the Arm Flat Seaming Machine
Working Video 1: www.foxsew.com/company-video/four-needle-six-thread-feed-off-the-arm-flatseamer-machine-153.html
Working Video 2: www.foxsew.com/company-video/4-needle-6-thread-feed-off-the-arm-flat-seaming-machine-532.html
Working Video 3: www.foxsew.com/company-video/four-needle-six-thread-flat-seaming-sewing-machine-486.html
Working Video 4: www.foxsew.com/company-video/four-needle-six-thread-feed-off-the-arm-flatseamer-machine-485.html
This machine is used on knitting sewing, the four needle and six Thread machine can perform a high tension and very 
smooth side seam, The cylinder bed and working foot can be easily go through the side seam and folding side. The 
different model are equipped with single cutter or double cutter can finish different stitch and used on different material.
 This machine can be equipped a small servo motor for special request.
 

The New Generation of coolers is suitable for the cooling of all kinds of pellet feed.
The temperature and moisture of pellets after pelletizing is too higher, can not pack the bags directly. so, we need use cooler to down it.
The principle of Counter-flow cooler is used to cool the pellets of high temperature and high humidity, and the materials are gradually cooled down from bottom to top, so as to avoid the phenomenon of quench caused by the direct contact between cold air and hot materials, so that feed can Prevent Surface Cracking.

Counter Flow Cooler

Pellet Cooler,Counter Flow Cooler,Prevent Surface Cracking,Feed Counter Flow Cooler

XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.feedmill.nl