Cold Plate Roll Bending Machine

Model NO.: R2M-500-II

Color: According to Customerâ€²s Request

Rate of Production: 3-12 PCS/Min

Machining Diameter Tolerance: +/-0.5mm

Air Pipe Diameter: 10mm

Time of Change Mould: Less Than 10 Minutes (One Worker Operate)

Feeding Plate Location Set: Yes

Working Temperature: -5 & +65 Degree Centigrade

Delivery Time: 25 Working Days After Advance Payment

Trademark: FJC

Transport Package: Wooden Case with Soft Film Layer

Specification: 500

Origin: China

HS Code: 8462219000

Â
Brief Introduction:
Hydraulic Automatic Two Rolling Plate Rounding Machine, the upper rolling is steel shaft, the under rolling is steel mandrel with stretchy rubber, adjust the distance between two rollings, when we start the machine, the rubber shaft will move down to the mandrel by two hydrocylinders. At the same time, due to the elastic distortion of rubber shaft, the steel plate will happen plastic distortion too.
Cold Plate Roll Bending Machine

Forming Principle:

Machining Results:
Cold Plate Roll Bending Machine

Advantage:
* Automatic taking out the cylindrical product
* Easy operation(manumotive/automatic/emergency-stop and etc), only need one worker.
* Once shaping
* Good roundness and etc.
The mandrel can be designed according to your requirements.
Â
Main Technical Data:

Machining Material	Carbon/Stainless Steel	Diameter Tolerance	Â±0.5mm
Machining Diameter	Â¢100mm~Â¢750mm	Seam Width	5mm~10mm
Machining Effective Length	200mm~500mm	Axial Malposition Tolerance	Â±0.5mm
Plate Thickness Range	0.8mm~4mm	Â	Â

Workshop:

Another Series:
Cold Plate Roll Bending Machine

If you are interested in our machine, please contact us for more information, welcome to contact us at any time, we will reply you as soon as possible!
Â
Â

Cylindrical Roller Bearings

Cylindrical Roller Bearings,Full Complement Needle Roller Bearing,Cylindrical Roller Bearing Nup306,Cylindrical Roller Bearing Nfp306

UKL Bearing Manufacturing Co., Ltd., , https://www.bearingukl.com