![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
8 channel video optical transceiver manufacturers fault <br> <br> Troubleshooting:
1, check whether the equipment is normal power supply.
2. Check whether the corresponding channel video indicator on the receiver is lit.
A: If the indicator light is on (the light indicates that the channel already has a video signal output). Then check whether the video cable between the receiver and the terminal device such as the monitor or DVR is connected properly, and whether the video interface connection is loose or there is a false weld.
B: The video indicator on the receiving end is off. Check whether the corresponding channel video indicator on the front end is on. (It is recommended to re-power the optical receiver to ensure the synchronization of the video signal)
8-channel video optical transceiver manufacturer's parameters
Road video optical transceiver is a video optical transceiver. This optical transceiver transmission channel adopts a modular design and can flexibly configure the number of channels according to engineering application requirements. The maximum configuration channel capacity is 8 forward video signals and 1 reverse data signal. The video signal is compatible with full-standard video signals; each video channel uses 8bit/13.5MHz digital sampling technology. The data signal supports 485 (optional) standard, baud rate 0-115200kps.
The digital optical channel adopts Gigabit transmission platform, transmission light wavelength 1310nm/1550nm, single-mode laser (LD) signal, the standard configuration transmission distance is 20Km, and maximum relay transmission distance is 80Km (the optical module needs to be replaced).
The device has a power status indicator, an optical signal indicator, a video signal indicator, and a data status indicator. It can intuitively detect the working status of the device power, optical signals, video signals, and data signals.
1, check whether the equipment is normal power supply.
2. Check whether the corresponding channel video indicator on the receiver is lit.
A: If the indicator light is on (the light indicates that the channel already has a video signal output). Then check whether the video cable between the receiver and the terminal device such as the monitor or DVR is connected properly, and whether the video interface connection is loose or there is a false weld.
B: The video indicator on the receiving end is off. Check whether the corresponding channel video indicator on the front end is on. (It is recommended to re-power the optical receiver to ensure the synchronization of the video signal)
8-channel video optical transceiver manufacturer's parameters
Road video optical transceiver is a video optical transceiver. This optical transceiver transmission channel adopts a modular design and can flexibly configure the number of channels according to engineering application requirements. The maximum configuration channel capacity is 8 forward video signals and 1 reverse data signal. The video signal is compatible with full-standard video signals; each video channel uses 8bit/13.5MHz digital sampling technology. The data signal supports 485 (optional) standard, baud rate 0-115200kps.
The digital optical channel adopts Gigabit transmission platform, transmission light wavelength 1310nm/1550nm, single-mode laser (LD) signal, the standard configuration transmission distance is 20Km, and maximum relay transmission distance is 80Km (the optical module needs to be replaced).
The device has a power status indicator, an optical signal indicator, a video signal indicator, and a data status indicator. It can intuitively detect the working status of the device power, optical signals, video signals, and data signals.
Guangzhou Frey Auto Parts Co,.Ltd , https://www.freyparts.com